Technical Data; Functions And Technical Features; Emergency Procedure When Alarm Sounds - Abus RWM150 Manuel Utilisateur

Safety information

Technical data

• Power supply
• Smoke detection
• Visual operating display
• Electric consumption
• Operating temperature
• Air humidity
• Sound pressure
• Alarm mute mode
• Detection range
• Installation location

Functions and technical features

• The smoke alarm does not detect gases, vapours, heat and fire/flames!
• It is possible that people with limited hearing may not hear the alarm!
For such cases special alarms with optical signalling are available.
• Especially high electromagnetic radiation may affect unit operation. Therefore, do
not install the alarm near devices which emit electromagnetic radiation or close
to magnets.
• This smoke alarm works according to the principles of optics (photoelectric
reflection) and contains a measuring chamber in which penetrating smoke
particles are measured.
Technical data
DC 3 V Lithium Battery (built-in)
photoelectric reflection
LED flashes approx. every 6 minutes
9.8 μA (Ø standby) || 80 mA (Ø alarm)
0° to 45° C
10 % to 90 % (non-condensing)
> 85 dB (A)@3 m
9 minutes
max. 40 m² within a single room
ceiling (internal rooms only)
– 24 –
Functions and technical features
• If the alarm threshold is exceeded, a loud, audible alarm will sound.
• The alarm will switch itself off as soon as the measuring chamber becomes
smokefree again.

Emergency procedure when alarm sounds

(1) Alert all co-residents
(2) Offer assistance to children, disabled and elderly people and invalids.
(3) Close all windows and doors behind you.
(4) Leave the building immediately.
(5) Do not use the elevators.
(6) Alert the fire service: tel. 112
Emergency procedure when alarm sounds
– 25 –
GB