Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
7
Maintenance / Disposing
7 .1 Gear box maintainance
DANGER!
Risk of injury from electric shock and mo-
ving parts!
Before opening the housing, switch off the
machine at the main switch and unplug the
mains plug.
NOTE!
The machine may not be modified in any way!
Operation of the machine is prohibited if mo-
difications are undertaken!
Both synchron gears, as well as the chain wheels and
drive chains must be greased monthly.
Proceed as follows:
1 . Remove the left side cover from the housing.
2 . Grease the above mentioned parts with a brush or
a grease gun, and a standard, commercially availa-
ble grease.
3 . Re-install the side cover and connect the machine
to the mains. The machine can be put back into
operation.
7 .2 Energy saving tip
Be certain that the machine is turned off overnight
(main switch (fig. 4/2) switched to „0").
7 .3 Disposing of the machine
Dispose of the machine in an environmentally
sound fashion at the end of its useful service
life. Do not dispose of any of the parts inclu-
ded in the machine or its packaging with
household trash.
18
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
8
Accessories
Description
Plastic bag, 900 x 900 x 1500 x 0,15 mm
Bottle of oil, 2 l
NOTE!
Please contact your dealer when ordering ac-
cessories and replacement parts.
9
Technical data
intimus 16 .50 SmartShred
Cutting size:
10 x 70 mm
6 x 50 mm
Cutting capacity
(in two stacks)
10 x 70 mm:
450 - 520 Blatt (70g/m2)
6 x 50 mm:
300 - 330 Blatt (70g/m2)
Cutting capacity:
400 V/50 Hz, 415 V/50 Hz, 200 V/50 Hz
230 V/50 Hz, 220 V/60 Hz, 200 V/60 Hz
Pre-fusing:
400 V - 415 V/50 Hz = 35 A
(gl fuse,
220 V - 230 V/50 Hz = 40 A
type 1 assignment)
200 V/50 - 60 Hz = 63 A
Working width:
500 mm
Noise level:
ca. 61 dB (A)
Power:
7,5 kW
Length:
1950 mm
Width:
1200 mm
Height:
1550 mm
Weight:
ca. 726 kg
Order-No .
99960
91869
94709 1 02/18
Publicité
Chapitres
Table des Matières
