The Rescue Sam Aed - Progetti RESCUE SAM ELRS-002 Manuel D'utilisation

2
1.2

The RESCUE SAM AED

A. Speaker. The speaker projects the voice prompts when the RESCUE SAM is on.
B. SHOCK button. This button will flash when a shock is recommended - push this button to deliver
the shock to the patient. This button is disabled at all other times.
C. Instructions LEDs. This LEDs will flash according to the voice prompts .
D. ON/OFF button. Push button to turn the RESCUE SAM on. Push again to disarm and turn the AED
off.
E. Information button and LED.
F. Pads connector port. Insert Patient Pads Connector into this port to connect pads to RESCUE SAM.
G. Battery pack. The battery pack provides a replaceable main power source for the RESCUE SAM.
H. Battery pack opening. Insert the battery pack firmly into this opening until the latch clicks into
place.
I. Battery pack eject lever. This lever releases the battery pack from the RESCUE SAM. To remove
the battery pack, push the lever and extract the battery pack from the unit.
J. Status Indicator. When the unit is off, this indicator blinks green to indicate the unit is fully
operational and blinks red to indicate unit needs attention from the user or servicing.
RESCUE SAM User Manual vers.1.0 March 2011
F H I G