Turning Power On And Off - Alpine CRA-1656SP Mode D'emploi

1
1
1
1
POWER
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
POWER
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
10
Basic Operation
CD Operation
Initial System Setup
Immediately after installing or applying power to
the unit, it should be initialized. Using a sharp
pencil or other pointed object, press the Reset
button.

Turning Power On and Off

1
Press the POWER button to turn on the unit.
The unit displays the Changer mode.
PWR
Note: The Remote Display Unit can be turned
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
Press the POWER button for at least 3 seconds
to turn off the unit.
PWR
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
Notes:
• Once you are sure all connections are
proper, you may turn the unit on.
• "FREQ." on the upper side of the PWR
button of the remote control unit is not used
to set the modulator frequency.
on by pressing any button.
English English