Hatco GLO-RAy GRSS Série Manuel D'installation Et D'utilisation page 10

INSTALLATION
Panel
3-1/4"
(83 mm)
Control Box mounting Options
GRSSB Built-In Installation
Model
GRSSB-2418
GRSSB-3018
GRSSB-3618
GRSSB-4818
GRSSB-6018
GRSSB-7218
Under Counter
Surface
7-1/4"
(184 mm)
7"
(178 mm)
3"
(76 mm)
Trim Mounting Ring
Countertop
GRSSB Built-In Installation
GRSSB Countertop Cutout Chart
Width
24-5/8" (625 mm) – 24-7/8" (632 mm)
30-5/8" (778 mm) – 30-7/8" (784 mm)
36-5/8" (930 mm) – 36-7/8" (937 mm)
48-5/8" (1235 mm) – 48-7/8" (1241 mm)
60-5/8" (1540 mm) – 60-7/8" (1546 mm)
72-5/8" (1845 mm) – 72-7/8" (1851 mm)
Do not modify wiring or cut thermostat capillary on control
box to increase remote mounting distance. Cutting
thermostat capillary will cause unit to overheat and may
damage unit as well as surrounding countertop.
8. Once all components are secured, proceed to the
OpERaTION section.
NOTE: a 6' (1829 mm) cord is supplied with this unit; any
excess cord should be routed neatly so it does not hang
down.
Apply a bead of NSF-approved
sealant between the countertop
material and trim mounting ring.
Sealant must be rated for use at
a minimum temperature of
250° F (121° C).
18-5/8" (473 mm) – 18-7/8" (479 mm)
18-5/8" (473 mm) – 18-7/8" (479 mm)
18-5/8" (473 mm) – 18-7/8" (479 mm)
18-5/8" (473 mm) – 18-7/8" (479 mm)
18-5/8" (473 mm) – 18-7/8" (479 mm)
18-5/8" (473 mm) – 18-7/8" (479 mm)
10
English
NOTICE
Depth
Form No. GRSSm-0615