Télécharger Imprimer la page

Fein Slugger JMU 404 M Mode D'emploi page 23

Publicité

Les langues disponibles

Les langues disponibles

OBJ_BUCH-0000000322-001.book Page 23 Monday, August 20, 2018 8:37 AM
en
23
PRCD personal protection switch
Fig. 14
(figure 14).
The PRCD personal protection switch is spe-
cifically for your protection; therefore, do not
misuse it as on On/Off switch.
If the PRCD personal protection switch is
damaged, e.g. due to contact with water, do
not use it any more.
The PRCD personal protection switch is
indispensable; it is used for protection of the
power tool operator against electric shock.
Under fault-free operation, the control lamp
of the PRCD personal protection switch lights
up red.
Check the operability of the PRCD personal
protection switch before beginning to work:
1. Connect the plug of the PRCD personal
protection switch with the mains socket out-
let.
2. Press the RESET–button. The indication
light on the PRCD personal protection switch
lights up red.
3. Disconnect the plug from the socket outlet.
The red indication light goes out.
4. Repeat steps 1. and 2.
5. Press the TEST–button; the red indication
light goes out. If the red indication light does
not go out, do not run the machine. In this
case, contact the customer service.
6. Press the RESET–button; when the indica-
tion light lights up red, the machine can now
be switched on.
Do not use the PRCD personal protection
switch for switching the power tool on and
off.

Publicité

loading

Ce manuel est également adapté pour:

Slugger jmu 404 m serieKbu 110-4 m