Fein Slugger JMU 404 M Mode D'emploi page 14

OBJ_BUCH-0000000322-001.book Page 14 Monday, August 20, 2018 8:37 AM
en
14
Filling the dismounted coolant container
Fig. 4
Upper closing cap
(figure 4)
Pull the empty coolant container out of the
drill stand housing of the magnetic core drill.
2.
Unscrew the cap from the coolant container.
Fill in pump-feedable cooling lubricant, e.g.
Slugger cutting oil.
Screw the cap onto the coolant container
1.
again.
Insert the filled coolant container into the
holder on the drill stand housing intended for
this purpose.
Coolant container
3.
4.
5.