StealthCam STC-G34 Manuel D'instructions page 17

o
SECURITY KEY – 0000 (default): To change the key to an owner operated one press the
ENTER button. With this option blinking, use the UP or DOWN arrow buttons change the
first digit to the preferred number or letter. Then using the LEFT button, move to the
second digit and change it to the preferred number or letter as well. Continue this until
all 4 digits are correctly set. Finally press the ENTER button to secure the new code.
NOTE: The camera owner is responsible for remembering the code. Should the code be
forgotten the owner must call in to Customer Service (877-­‐269-­‐8490) for directions on getting
the unit restored to factory default. In order for the owner to be authorized for the reset, this
camera must be registered with Stealth Cam.
!
FORMAT CARD – NO (default): This setting is used to format the SD memory card installed.
With this option blinking, pressing the UP or DOWN arrow buttons will cause the camera to
cycle between the two options of NO or YES. When the YES option is chosen and the ENTER
button is press the camera will format the card, deleting any previous information that was on
the card. Pressing the DOWN arrow key will move the display back to the starting option of
SETUP DATE. (See page 19 for more details.)
!
LANGUAGE – ENGLISH (default): This new feature allows you to select which language you
prefer to use in the menu. By pressing the ENTER button you will be able to scroll through the
following choices: English / German / French / Spanish. Once selected press the ENTER button
again to save your setting.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
Page
17