Loading The Battery; Inserting A Card - Olympus CAMEDIA C-5060 Wide Zoom Mode D'emploi

Masquer les pouces Voir aussi pour CAMEDIA C-5060 Wide Zoom:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LOADING THE BATTERY

1
Make sure the power switch is set to OFF.
2
Slide the battery compartment
lock from = to ) and open the
battery compartment cover.
3
Insert the battery, making sure
that it is correctly oriented as
shown in the illustration.
• The lock secures the battery when
correctly loaded.
En
4
Close the battery
compartment cover.
5
Slide the battery compartment
lock from ) to =.

INSERTING A CARD

"Card" in this manual refers to the xD-Picture Card, CompactFlash and
Microdrive. The camera uses the card to record pictures.
1
Make sure the power switch is set to OFF.
2
Open the card cover.
3
Insert a card.
xD-Picture Card
• Insert the card into the slot with the contact
area toward you. Ensure the card is not
inserted diagonally.
• Insert the card as far as it will go until it
clicks.
• If the card is inserted incorrectly oriented or
it is inserted at an angle, the contact area
may be damaged or the card may become jammed.
• If the card is not inserted fully, it may not be able to record data.
14 En
Battery lock
Notch
Contact area
Card cover

Publicité

Table des Matières
loading

Table des Matières