Unit; List Of Supplied Components; Storage; Receipt And Unpacking - Olimpia splendid MAESTR SMART Directives D'installation, D'utilisation Et D'entretien

1 - UNIT

1.1 - LIST OF SUPPLIED COMPONENTS (Fig.1)
in addition to the unit this package includes the parts listed below. Before installing verify the parts are within
easy reach.
A. Paper template to make holes
B. remote control
C. Use and maintenance booklets and warranty document
D. Strip of adhesive isolating tape
E. air inlet and outlet external grids including chains and kit for installing the grids (x 2)
F. Internal flanges (x 2)
G. Sheet for wall pipes
H. Kit of screws and anchor bolts
L. Wall anchoring bracket

1.2 - STORAGE

Store units in an area protected from outdoor ambient conditions. Units should be stored on pallets or beams
to isolate from the ground.
DO NOT TURN THE UNIT OVER OR DAMAGE WILL RESULT.

1.3 - RECEIPT AND UNPACKING

The products are packaged by qualified personnel using suitable packaging material. The units are shipped
complete and in perfect condition when leaving our facility. However, we suggest that you perform the
following checks:
a. Upon receipt check if the package is damaged. if damage is found note this on the shipping documents
taking photographs of any damage. notify the shipper by registered mail with 3 days of receipt.
b. Unpack and check the contents against the packing list.
c. Check that none of the components have been damaged during transport; if damage is found notify the
shipper by registered letter, which should include photographic evidence within 3 days of receiving the
unit.
d. Send the same information by fax to olimPia SPlenDiD.
e. No claims for damage will be accepted if made more than 3 days after the delivery of the goods.
It is recommended to keep the packaging during the warranty period for any
possible delivery of the product to a service center. After the warranty period
ends dispose of the packaging in compliance with prevailing regulations.
USA - 5
MAESTRO SMART