Preliminary Inspections; What's In The Box; Unpacking And Inspection - Franklin Electric MONODRIVE UTILITY Manuel Du Propriétaire

PRELIMINARY INSPECTIONS

What's in the Box

PRELIMINARY INSPECTIONS
What's in the Box
1. Variable Frequency Drive (VFD)
2. Pressure Sensor and Boot
3. Sensor Cable
4. Screwdriver/Adjustment Tool
5. Strain Relief Fitting
6. Owner's Manual

Unpacking and Inspection

1. Inspect exterior of package for shipping damage. If there is damage, notify the shipping agent
and your sales representative.
2. Verify the part number and product ratings on the identification label are correct.
3. Remove VFD from the box and check for damage.
4. Remove the VFD cover and check part number, current rating, and nominal voltage on the
sticker attached to the side of the VFD. Make sure the electrical and environmental ratings are
correct and adequate for the application.
10