Display Settings - Briteq BTX-FALCON Mode D'emploi

ENGLISH
Bl.O. Gobo Change
"Blackout while changing the gobos": while gobos are changing the projector can cut off the output to
obtain a special effect.
 Select "Bl.O. Gobo Change" and press ENTER
 Use DOWN / UP buttons to select:
 No: output stays on during gobo changes.
 Yes: output shuts off during gobo changes.
 Press the ENTER button to save.
To return to a previous menu, press the MENU button.
Brightness Cali
Although the BTX-FALCON is 100% backward compatible with the previous BTX-180LS, the new
LED-engine in the BTX-FALCON has about 40% more output. With this function you can match
(reduce) the light output with that of the BTX-180LS.
 Select "Brightness Cali" and press ENTER
 Use DOWN / UP buttons to change the light output from 50% to 100%.
(a value of about 60% will match with the BTX-180LS)
 Press the ENTER button to save.
To return to a previous menu, press the MENU button.

Display Settings

This submenu contains display related settings
 Press the MENU button and select the "Display Settings" submenu.
Display Inverse
The projector can be fixed/used in upward position
or hung in upside-down position. To make reading
of the display easier, you can turn it over 180°.
No: Display readable while the projector is in
upward position.
Yes: Display readable while the projector is in
upside-down position.
 Select "Display Inverse" and press ENTER
 Use DOWN / UP buttons to select Yes or No.
 Press the ENTER button to save.
To return to a previous menu, press the MENU
button.

Notice an alternative shortcut for this
function: press the
buttons together.
Backlight Auto Off
No: display is always lit.
Yes: display turns dark when not used for
some time.
 Select "Backlight Auto Off" and press ENTER.
 Use DOWN / UP buttons to select Yes or No.
 Press the ENTER button to save.
To return to a previous menu, press the MENU
button.
Backlight Intensity
Used to set the intensity of the display
backlight.
 Select "Backlight Intensity" and press ENTER.
 Use DOWN / UP buttons to change the intensity
between 1 and 10.
 Press the ENTER button to save.
To return to a previous menu, press the MENU button.
BRITEQ
®
UP & DOWN
7/79
OPERATION MANUAL
BTX-FALCON