Disposal - Hilti DX 351-CT Mode D'emploi

Fault
Nail breakage.
en
Unused cartridge problem.
Considerable force is required
to unscrew or refit the locking
sleeve.

10 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.
12
Printed: 17.04.2014 | Doc-Nr: PUB / 5069830 / 000 / 03
Possible cause
Driving power is too low.
The application limits have been ex-
ceeded (very hard material).
The tool is not pressed fully against
the working surface.
Dirt or deposits on the screw thread.
Remedy
Increase driving power or use a more
powerful cartridge.
Use a stronger nail.
Press the tool fully against the work-
ing surface and then pull the trigger.
Clean the thread. Spray lightly with
Hilti lubricant spray and then wipe off
with a cloth.