Disposal Considerations - Hilti HIT-RE 500 V4 1400 Jumbo Mode D'emploi

Masquer les pouces Voir aussi pour HIT-RE 500 V4 1400 Jumbo:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Hilti HIT-RE 500 V4 1400 Jumbo
Adhesive anchoring system for rebar and anchor fastenings in concrete
Prior to use of product, follow the instructions for use and the legally obligated safety precautions.
See the Safety Data Sheet for this product.
Hilti HIT-RE 500 V4
Contains: 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane (A); Trimethylolpropane triglycidylether (A);
2-methyl-1,5-pentanediamine (B); m-Xylylenediamine (B);
(A,B)
Danger
H314
Causes severe skin burns and eye damage. (A, B)
H317
May cause an allergic skin reaction. (A, B)
H335
May cause respiratory irritation. (B)
H341
Suspected of causing genetic defects. (A)
H360
May damage fertility or the unborn child. (A)
H411
Toxic to aquatic life with long lasting effects. (A, B)
P280
Wear protective gloves/protective clothing/eye protection/face protection.
P262
Do not get in eyes, on skin, or on clothing
P302+P352
IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P333+P313
If skin irritation or rash occurs: Get medical advice/attention.
P337+P313
If eye irritation persists: Get medical advice/attention.
Recommended protective equipment:
Eye protection: Tightly sealed safety glasses e.g.: #02065449 Safety glasses PP EY-CA NCH clear;
#02065591 Goggles PP EY-HA R HC/AF clear;
Protective gloves: EN 374 ; Material of gloves: Nitrile rubber, NBR
Avoid direct contact with the chemical/ the product/ the preparation by organizational measures.
Final selection of appropriate protective equipment is in the responsibility of the user

Disposal considerations

Empty packs:
Leave the Mixer attached and dispose of via the local Green Dot collecting system
– or EAK waste material code 15 01 02 plastic packaging.
Full or partially emptied packs:
dispose of as special waste in accordance with official regulations.
– EAK waste material code: 20 01 27* paint, inks, adhesives and resins containing dangerous substances.
– or waste material code: EAK 08 04 09* waste adhesives and sealants containing organic solvents or other dangerous
substances.
Content:
1400 ml / 47.3 fl.oz
Weight:
1980 g / 69.8 oz
42
(A,B)
(A)
(A)
Wa
F
o
Pro

Publicité

Table des Matières
loading

Table des Matières