Installation Location - Pioneer PDK-WM03 Mode D'emploi

* Do not modify any parts.
Failure to do so may result in the plasma display falling and causing injury.
* Do not use any damaged parts. Failure to do so may result in the plasma display falling and causing injury.
In the event that any parts are damaged, please contact the dealer.
* This unit is made especially for use with Pioneer 61 inch and 50 inch plasma displays.
Do not use with any other equipment since the equipment could fall and cause injury.
* Do not obstruct the ventilation holes of the plasma display. Doing so will prevent the dissipation of heat and
may result a fire. Do not use the plasma display in the following ways:
Do not install the plasma display in a tight place where ventilation is poor, place a cover on it, etc.
* Do not install the plasma display in front of the vents of an air conditioner or heater, or in a place where
there is strong vibration. Doing so may result in fire or electrical shock.
* Do not install the plasma display in humid or dusty places, or where it will be exposed to greasy smoke or
steam (such as near cooking equipment or humidifiers). Doing so may result in a fire. Do not use the
plasma display outdoors. Doing so may result in a fire or electrical shock.
* Leave sufficient space around the plasma display when installing it.
Failure to do so may load to head buildup within the display and could result in fire.
* Hold the plasma display in place while attaching it to the unit. Failing to do so may lead to it falling and
causing injury.
* Do not apply pressure to the glass surface of the plasma display. The pressure could cause it to crack and
it could cause injury.
* Do not attach screws to the plasma display without the fittings mounted. Doing so could cause breakdown.
* Never use screws other than those supplied.
Use of such screws could cause breakdown.
Avoid rooms with a lot of dust, humidity, greasy smoke, or tobacco smoke.
Dirt will adhere to the surface of the display monitor screen and cause a deterioration in image quality.
Avoid places in which the screen is exposed to direct sunlight or illumination light.
When surrounding light hits the screen directly, the image appears washed out and is difficult to view.
Avoid places which reach high temperatures or low temperatures.
Such extreme temperatures will cause breakdown.
WARNING
CAUTION

Installation Location

E-3
Heed the Following