Checklist - EdilKamin SALLY Installation, Usage Et Maintenance

To be integrated with a complete reading of the technical specifications
Positioning and installing
• First ignition performed by authorised CAT who released the guarantee certificate
• Air vent in the room
• Only the stove outlet passes through the smoke channel/chimney flue
• Features of the smoke channel (stretch of duct connecting the stove to the flue/chimney):
•
• Chimney pot that is high enough to avoid downdraft areas
• The discharge pipes are made of a suitable material (stainless steel is recommended)
• When using any flammable materials (e.g. wood), all precautions have been taken to prevent a fire hazard
Use
• Good quality, dry pellets are used
• The chimney pot and ash compartment are clean and well positioned
• The door is closed properly
• The combustion chamber is inserted properly into the relevant compartment
REMEMBER TO VACUUM THE COMBUSTION CHAMBER BEFORE EACH IGNITION
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.
In accordance with art. 26 of Legislative Decree no. 49 of 14th March 2014, "Implementation of Directive 2012/19/UE on the
disposal of electrical and electronic devices (RAEE)".
The crossed-out dustbin symbol displayed on equipment or its packaging indicates that the product at the end of its life
must be collected separately from other waste.
At the end of its useful life, the user should therefore deliver the product to a suitable local sorted collection centre for
electrical and electronic devices.
Sorted collection for recycling, treatment and environmentally compatible scrapping contributes to the prevention of
negative effects on the environment and health, and promotes the re-use and recycling of the materials of which the
equipment is made.
CHECK LIST
a maximum of 3 curves,
a maximum 2 horizontal metres
- 45
-