Table des Matières
Publicité
5.1
TWO SIDED APPLIANCE
EDGES ARE SHARP, ALWAYS WEAR GLOVES WHEN WORKING WITH SHEET METAL.
Lift the frame up and secure with the screws just removed.
A.
Erect the steel frame supplied as illustrated and rivet into place.
B.
NOTE: For heavier fi nishing materials such as marble, we recommend adding extra support to the
frame. Rivet metal studs in place. Ensure there is adequate fl oor support for the appliance and
fi nishing material.
!
METAL HEADER
WARNING
1
METAL STUD
2
W415-0745 / E / 08.15.12
27
Publicité
Table des Matières
