Table des Matières
Publicité
30
* When constructing the enclosure allow for fi nishing material thickness to maintain clearances.
IMPORTANT: Before fi nishing in the appliance test the operation using the remote control, cycling it
through all of its different modes, see "OPERATION" section. Should trouble shooting be required, ac-
cess to the controls can be made through the pre-fi nishing access panel.
60 1/2"
MINIMUM
67 7/8"
This appliance is
supplied with two stand-offs.
For convenience the stand-offs
have been shipped fl at and located
on the back of the appliance. Before framing
ensure the stand-offs are bent up and screwed into
place ensuring a height of 6".
STAND-OFFS
Bend and secure the stand-offs as
illustrated
:
A
23 3/4"*
B
C
STAND OFF
6"
W415-0745 / E / 08.15.12
Publicité
Table des Matières
