INSTALLATION
INSTALL THE PILLAR AND GATE BRACKETS
The following illustrations show a left-hand installation. The dimensions are
recommendations and your dimensions may differ based on your installation site.
1
Determine the location of the pillar bracket and gate bracket according to the
dimensions shown in Figure 1. Mark the holes for both brackets (Figure 2).
2
Drill the holes for the brackets (Figure 2) and insert dowels or other inserts
suitable for bracket resistance (Figure 3).
3
Attach the pillar bracket and the gate bracket with the hardware provided
(Figure 4).
Figure 2
Figure 1
TOP VIEW
Figure 3
11
INSTALL THE PILLAR AND GATE BRACKETS
Pillar Bracket
minimum 11.4"
(29 cm)
A (mm)
OPENING ANGLE
90°
150
120°
200
A
Pillar
Figure 4
4.3"
Gate Bracket
(11 cm)
B (mm)
0 - 380
0
17.7" (45 cm)