Anti-Tip Tubes - Zippie YOUNGSTER 3 Notice D'utilisation

Masquer les pouces Voir aussi pour YOUNGSTER 3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 64
To fasten buckle:
Firmly push male buckle into
female buckle.
WARNING!
If in doubt about the use and operation of the lap belt then
ask your healthcare professional, wheelchair dealer, carer or
attendant for assistance.
Advice to client
The lap belt must only be fitted by an approved Sunrise Medical
dealer / agent. The lap belt should only be adjusted by a
professional, or a Sunrise Medical approved dealer / agent.
The lap belt must be checked on a daily basis to ensure it is
adjusted correctly and free from any obstruction or adverse
wear.
Sunrise Medical does not encourage the transportation of any
person in a vehicle using this lap belt as a method of restraint.
Please see Sunrise Medical transit booklet for further advice on
transportation.
Maintenance:
Check lap belt, and securing components, at regular intervals
for any sign of frays or damage. Replace if necessary.
NOTE:
The lap belt should be adjusted to suit the end user as detailed
above. Sunrise Medical recommend that the length and fit of the
belt be checked on a regular basis to reduce the risk of the end
user inadvertently re-adjusting the belt to an excessive length.
18
YOUNGSTER 3
To release belt:
Press exposed sides of male
buckle and push towards cen-
tre whilst gently pulling apart.

Anti-Tip Tubes

Anti-Tip Tubes (Fig. 4.25- 4.26)
Anti-tip tubes (1) provide additional safety for inexperienced
users when they are still learning how to operate their
wheelchairs. Anti-tip tubes (1) prevent a wheelchair from tipping
over backwards. Pushing the anti-tip tubes (1) will move them
downwards; they can also be swung forward. An interval of
3 cm to 5 cm should be maintained be tween them and the
ground. You must swing the anti-tip tubes forward when going
up and down large ob stacles (such as a curb) to prevent them
from touching the ground.
WARNING!
Incorrect set up of the anti-tips will increase the risk of a
rearwards tip.
Fig. 4.25
Fig. 4.26
1
3-5 cm

Publicité

Table des Matières
loading

Table des Matières