AEG KE7415001 Notice D'utilisation page 12

12 Using the oven
Cooking duration
Cooking duration
and End of cooking
and End of cooking
time combined
time combined
Minute minder
Electronic programmer functions
This function allows both cooking time length and the stop time to be
programmed. With this function, the oven switches on automatically at
the set time and operates for the cooking time it has been programmed
for. It switches itself off automatically at the entered stop time.
1 Press on the clock button
2 Select the cooking time by pressing the
3 Two consecutive beeps will then sound, and the display will show the
remaining cooking time. The
4 Press on the clock button
lights up.
5 Select the cooking stop time by pressing the
6 This will be confi rmed by two beeps. The current time will show on
the display and the
7 Select a cooking function and temperature.
8 The oven will remain off, with the
fl ashing slowly. The clock will show the current time and the inside
light will remain off. The oven is now programmed.
9 When it is time to start cooking, the oven will switch on and will
operate for the programmed cooking time. The time function display
will show the remaining cooking time.
10 Once the set time is reached, the oven will turn off, an alarm will
sound and the
11 Press on any button on the control panel to stop the alarm.
If you wish to change the cooking stop time while cooking is in
progress, press on the clock button until the
You can then change the cooking stop time by pressing on the
buttons.
The two beeps you hear after that will confi rm the new time has been set.
A beep will go sound when the set time has fi nished, whether the oven is
on or off.
Programming the Minute Minder:
1 Press on the minute minder button
2 Select the length of time after which you want the alarm to sound by
pressing on the
3 You will then hear two beeps; the display will show the time left be-
fore the alarm sounds and the symbol
that the timer has been set.
4 Once the programmed time has passed, an alarm will sound and the
symbol will begin to fl ash more quickly.
5 Press on any button on the control panel to stop the alarm.
You can change the programmed time whenever you want by touching
the minute minder button
touching the buttons. The two beeps you hear after that will
confi rm the new time has been set.
. The symbol
symbol will fl ash slowly.
several times until the symbol
symbol will remain lit.
symbol lit and the
and symbols will fl ash.
. The symbol
buttons.
until the symbol
will light up.
buttons.
buttons.
symbol
symbol fl ashes.
lights up.
will fl ash slowly, indicating
fl ashes, and then