L Ow L Iqu Id L Ev El; Maintenance; Cleaning; Warranty - Sammic WATERBATH Serie Mode D'emploi

L ow L iqu id L ev el

It the water drops below the recommended minimum level, or the unit is inadvertantly
switched on without being immersed in water, "FILL" apears on the display as a visual alert
and both heating and stirring are immobilised.
To reset the Low liquid level warning:
- top up liquid level
- switch the unit OFF and then ON.

Maintenance

The low liquid level float switch should be checked periodically by lowering the level of liquid in
the tank and a "FiLL" message should appear. In the event that this does not occur please
contact Service.

Cleaning

The circulator must be cleaned at regular intervals:-
Ca s ew o r k : wipe with a cloth or sponge soaked in warm soapy water.
Immersed parts descale regularly to ensure that the corrosion resistance and normal oper-
ating conditions are maintained through out its working life. Descale by adding 1 litre of
vinegar to normal volume of water and gently heating to 50°C for an hour, empty and
brush the lime away. Rinse thoroughly afterwards.

Warranty

The Sammic bath is covered by a 2 Year Warranty.
Portable Appliance Testing
These tests should be conducted by a qualified person.
Use cau tion w h en refillin g th e tan k or pot as h ot elem en ts can
spit an d create scaldin g steam .
Im portan t - please follow th ese clean in g in stru ction s to av oid
possible dam age to th e u n it w h ich m ay affect its perform an ce.
Discon n ect t h e circu lator f rom t h e elect rical s u pply before
clean in g.
DO NOT PAT TEST THE CIR CUL ATOR UNL ESS THE HEATER IS
IMMERSED IN WATER.
THIS EQUIP MENT MUST NOT BE FL ASH TESTED!
9