Setting Menu; Information Menu; Mowing Tips - AL-KO Robolinho 100 Traduction Du Mode D'emploi D'origine

en
[All days] menu item
1. Select the [All days] menu item with the corresponding [arrow key] (3-3) and confirm with the [mul-
tifunction key right] (3-5).
2. Press the [down arrow key] (3-3) until [Change] is active.
3. Select the required menu item with the corresponding [arrow key] (3-3) and confirm with the [multi-
function key right] (3-5).
Explanation of symbols
(1) Menu item
(2) Menu item
(3) [-]
[R]
Edge mowing
[M]
(4) Start time
(5) End time
(6) [0 - 9]
Fixed entry point
[?]
Automatic entry point

SETTING MENU

Set the data, time, language and recalibrate, see
start-up.
Activate or deactivate the button tones
1. Select [button tones].
2. Confirm with the [multifunction key right] (3-5).
3. Activate or deactivate the button tones with
the [multifunction key right] (3-5).
4. Confirm the corresponding selection with the
[menu key] (3-8).
Changing the display contrast
1 Select [Display contrast].
2 Select [Display contrast] with the [arrow keys]
(3-3) and confirm with the [multifunction key
right] (3-5).
3 Confirm the selection with the [menu key]
(3-8) and return to the main menu.
30
All days
Day of week
Mowing window deactivated
The Robolinho mows on the right along the boundary
cable. After mowing the edges, the Robolinho conti-
nues mowing the marked-out area.
Normal mowing
The Robolinho departs from the base station at the
selected time for mowing.
The Robolinho moves back to the base station at the
selected time.
The Robolinho departs from the selected entry point at
the selected time for mowing.
The entry points are changed automatically (recom-
mended setting).
Restoring factory settings
1 Select [Factory settings].
2 Enter the PIN code again and confirm.
3 Confirm the selection with the [menu key]
(3-8) and return to the main menu.

INFORMATION MENU

The information menu is used for calling up the
software status, hardware status, current settings
(program info) and faults. No settings can be
made in this menu.
Faults
Display of date, time and fault code with fault mes-
sage. All fault messages since start-up are listed.

MOWING TIPS

Cutting height at a constant 3 - 6 cm, do not
mow off more than half of the lawn height.
Adjust the mowing times accordingly.
Program menu
Robolinho 100
©