Switching Supply And Exhaust Fan On/Off - Zehnder ComfoControl Luxe Manuel De L'utilisateur

� Setting 3 g Temporarily High.
- Use this position during cooking,
showering and when extra ventilation
is briefly required.
The ventilation unit will switch
to the highest ventilation position
set in the house unless overruled
by an automated software
programme.
The different ventilation settings can be
manually set as follows:
1. Press the current ventilation setting.
- A new settings screen will now appear
on top of the main screen.
2. Set the preferred ventilation setting
using ' ' and ' '.
3. Press ' ' to return to the main screen.
- The selected ventilation setting will
appear in the small house on the CC
Luxe.
Check:
Manual ventilation
During manual ventilation, the CC Luxe
will not display "AUTO" but "MAN", and
the Auto button will appear light.
4. Press "Auto" to return to automatic
ventilation.
Temporary high setting
Once the programmed time delay
is complete, the ventilation unit
automatically switches back to the former
ventilation setting. The time delay can
be deactivated earlier by selecting a new
ventilation setting.
Wednesday
3
Vent
2
1
GHE
2.6 Switching supply and
exhaust fan on/off
Bear in mind that switching off
the supply or exhaust fan will
temporarily imbalance your
dwelling's ventilation system.
As soon as the supply and/or
exhaust fan is switched on or
off manually, the CC Luxe will
automatically switch to manual
modes.
The supply and/or exhaust fan
can be switched on/off manually
only when shown in brackets.
The supply and exhaust fan can be
switched off as follows:
� Press ' ' to switch off the supply fan.
- A ' ' will now appear instead of the
arrow.
� Press ' ' to switch off the exhaust fan.
- A ' ' will now appear instead of the
arrow.
The supply and/or exhaust cannot be
manually switched off in, among others,
the following cases:
� The open fire programme is activated:
Neither the supply nor exhaust can be
switched off manually.
� The ComfoHood is active: Supply
cannot be switched off manually.
The supply and exhaust fan can be
switched on as follows:
� Press the left '
supply fan.
- A ' ' will again appear instead of the
cross.
� Press the right '
exhaust fan.
- A ' ' will again appear instead of the
cross.
' to switch on the
' to switch on the
27 EN