Reading And Setting The Ventilation Volume - Zehnder ComfoControl Luxe Manuel De L'utilisateur

temperature displayed. This can be set as
follows:
1. Press "Settings".
- A new menu will now appear on top of
the main screen.
Settings
Ventilation
Temperature
2
System
Check:
2. Press "System".
- A settings screen appears.
3. Press " " to move to the second
settings screen.
4. Press "T Correction".
Advanced settings
Language
4
T Correction
Service Login
3
Check:
5. Press the button underneath the
'Temperature' text (at the bottom of
the T Correction menu screen) until it
displays the preferred setting.
- This button can be set as follows:
� Show all: Both temperatures are
visible.
� Indoor only: Only the room
temperature is visible.
� Hide all: No temperatures are visible.
6. Press ' ' to return to the main screen.
2.5 Reading and setting the
ventilation volume
Reading the ventilation level
The current ventilation level, e.g. "2", will
always be displayed in the small house
on the CC Luxe. The ventilation unit
regulates the required ventilation levels
automatically in accordance with a preset
ventilation programme. During automatic
ventilation, the CC Luxe will display
EN 26
Wednesday
Cooker hood
1
Settings
GHE
6
Temperature
5
Show All
GHE
"AUTO" in the left-hand bottom corner,
and the Auto button will appear dark.
Besides showing the programmed
ventilation setting, the CC Luxe also
displays whether a temporary control
system (such as a tempurature sensor
or a bathroom switch) is overriding the
ventilation setting.
In the event a required ventilation setting
is being overridden by a time delay (such
as the time delay of a bathroom switch), a
' ' appears after the ventilation setting.
In the event a required ventilation setting
is being overridden by a signal from a
sensor (such as a CO
displayed in the status bar of the CC Luxe.
Check:
Setting the ventilation levels
The ventilation level can also be set
manually by setting this higher or lower. A
total of 4 ventilation settings can be set.
These are:
� Absent -> Setting.
- Use when absent.
At level
ventilated using the minimum
prescribed ventilation volume.
� Level 1 g Low.
- Use in the event of low ventilation
need.
� Level 2 g Normal.
- Use in the event of normal
ventilation need.
� Setting 3 g High.
- Use this position during cooking,
showering and when additional
ventilation is needed.
sensor), an 'A' is
2
Monday
Cooker hood
Settings
A
GHE
, the house is