Service Login; Warranty And Liability; Warranty Conditions - Zehnder ComfoControl Luxe Manuel De L'utilisateur

- 12 - 28 ˚C.
E. Programme the next day, if so desired.
- To that end, repeat steps a to d.
4. Press ' ' to return to the main screen.
If the minutes settings screen
is open, it must be closed first
before the temperature settings
menu can be closed with '
Selecting factory reset will
reload the default comfort
temperature (20ºC).
Copying temperature programme
The "COPY" button makes it possible to
copy a selected day to another day. This
can be done as follows:
1. Select the day to be copied.
- The selected day is framed.
2. Press "COPY".
- COPY will appear dark.
3. Select the day to which the copy must
be sent.
- The selected day is framed.
Program temperature
3
Sa Su
1
Mo Tu
We Th
2
copy Fr
Check:

2.14 Service login

The Service Login is intended especially
for the fitter, enabling him to set the
system's P-menus. This feature is
protected by a Login and cannot be
accessed by the user.
EN 32

3. Warranty and liability

Warranty conditions

The CC Luxe is covered by a
manufacturer's warranty for a period of 24
months after fitting up to a maximum of
30 months after the date of manufacture.
Warranty claims may only be submitted
for material faults and/or construction
.
faults arising during the warranty period.
In the case of a warranty claim, the CC
Luxe must not be dismantled without
written permission from the manufacturer.
Spare parts are only covered by
guarantee, if they were supplied by the
manufacturer and have been installed by
an approved installer.
The warranty becomes invalid if:
� The guarantee period has elapsed;
� Parts are used which were not supplied
by the manufacturer;
� Non-authorised changes or
modifications have been made to the
unit.
Liability
The CC Luxe is designed and
manufactured for use with a balanced
ventilation system with heat recovery. Any
other application is seen as inappropriate
use and can result in damage to the CC
Luxe or personal injury, for which the
GHE
manufacturer cannot be held liable.
The manufacturer is not liable for any
damage originating from:
� Non-compliance with the safety,
operating and maintenance instructions
in this manual;
� The use of components not supplied
or recommended by the manufacturer.
The responsibility for the use of such
components lies entirely with the fitter.
� Normal wear and tear.