Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR II Manuel D'utilisation page 18

A/M (Autofocus with manual override. AF priority) mode and M/A
(Autofocus with manual override. MF priority) mode
Jp
En
De
a
Set the focus mode switch to A/M or M/A.
Fr
b
You can manually override autofocus by operating the focus ring while
pressing the shutter release button halfway down or the AF-ON button on
Es
the camera.
c
Pressing the shutter release button halfway down or pressing the AF-ON
button on the camera again will cancel manual override and return to
Se
autofocus mode.
To limit the range of autofocus
Ru
This function is only available with autofocus.
Nl
It
Ck
Vibration reduction mode
Basic concept of vibration reduction
Ch
Kr
18
M/A: Autofocus can be overridden by manually focusing with
the focus ring.
A/M: Autofocus can be overridden by manually focusing with
the focus ring, but focus ring detection sensitivity is lower
than in M/A mode. Use this mode to avoid canceling the
AF setting by unintentionally moving the focus ring.
• With AF operation, if the subject is always more than 5 m
(16.4 ft.) away, set the focusing limit switch to
reduce focusing time.
• If the subject is sometimes 5 m (16.4 ft.) or closer, set it to
FULL.
Camera shake
Weak
Strength of vibrations
Set the vibration reduction mode switch to NORMAL.
Set the vibration reduction mode switch to ACTIVE.
Panning shots
∞
–5m to
Strong
camera shake
when taking
pictures
from a moving
vehicle
Strong