Alarm; Setting The Time Of The Alarm - TechniSat 451 CD IR Mode D'emploi

14.2

Alarm

> You can access the alarm settings via Menu > Main Menu > Alarm.
Alternatively:
> Press the ALARM 1/2 button (17, 18) on the remote control to go directly to the alarm settings.
14.2.1

Setting the time of the alarm

The alarm function cannot be used until the correct time has been set. Depending on the configuration, this either happens
automatically or will need to be set manually. For more information on this, see Section 15.3.
> Select one of the alarm time memories (Alarm 1 or Alarm 2) and set the values you want one by one.
Repeat Select from Off, Daily, Once, Weekend (SAT-SUN), Weekdays (MON-FRI).
Time Set the time at which you want to be woken up.
If you have chosen Once as the repeat option, the date is also required.
Mode Set the source with which you want to be woken up. The options are Buzzer, Internet Radio, Digital Radio
(DAB) or FM.
Programme Select whether to play Last Listened To or one of the favourites memory slots from the previously set
source.
If not all of the favourite memory slots are available for selection, please programme the alarm while the
radio is in the mode you want.
Volume Select the volume at which you wish to be woken up.
The values you have just set are only accepted once you have saved them.
Save
The alarm is active as long as the alarm has been set to Alarm > [On] at the outset. An alarm icon appears in the status
bar with the corresponding number of the active alarm . When set to Off, the alarm is not active at the set time.
DE
EN
FR
NL
99