Signal Strength - TechniSat 451 CD IR Mode D'emploi

6.1.6

Signal strength

> Press the INFO button multiple times until the signal strength is displayed.
> The level of the bar indicates the current signal strength.
Stations with a signal strength below the minimum signal strength are not broadcasting a strong enough signal. Adjust
the antenna position again if required.
You can select the reception channels individually and have their signal strengths displayed under the Set Manually
menu item. You can adjust the telescopic antenna optimally for channels suffering from poor reception in the installation
location. This is how stations which have not been found during a scan up until now can be found and played.
> To do so, select Menu > Set Manually and then select a broadcast frequency. The signal intensity is then shown in this
frequency.
82
Minimum signal intensity
Signal strength