Source Selection; Adjusting The Volume; Activating The Mute Function; Menu Operation - TechniSat 451 CD IR Mode D'emploi

4.4.3

Source selection

> Press the MODE button on the device (1) or on the remote control (14) multiple times to scroll through the available
sources.
The currently selected source is shown in the display.
4.4.4

Adjusting the volume

> Turn the VOLUME/
On the remote control, use the VOL+/- rocker button (15).
The adjusted volume is shown in the display during the control process.
If the volume is turned down completely, the device switches to standby mode after about 15 minutes.
4.4.5

Activating the mute function

> You can mute the volume using the audio mute button (13). "Mute" appears in the display and in the status bar.
> Pressing the button again switches the sound back on.
4.4.6

Menu operation

The menu is divided into the menu for the respective source and into the system settings that apply to all sources. Operation
within the menus is carried out using the SCROLL&SELECT knob (7) on the device or with the up/down arrow buttons (10)
and the OK button (9) on the remote control.
> Turn the SCROLL&SELECT knob (7) to the right and left or press the up/down arrow buttons (10) on the remote control
to move the highlight or change the highlighted value.
> By turning the SCROLL&SELECT knob (7) or pressing the OK button (9) on the remote control, you can confirm a
selection to enter a submenu or to save the set value.
If a value has been changed, this is saved. If there is an arrow (>) next to a menu item, you can access additional settings
or functions.
76
knob on the device (3) to decrease or increase the volume.