Sw Info; Cleaning - TechniSat 451 CD IR Mode D'emploi

15.8

SW info

> You can view the software version currently installed the device under MENU > Main Menu > System Settings > Info.

16 Cleaning

To avoid the risk of electric shock, do not clean the device with a wet cloth or under running water. Remove the mains
plug prior to cleaning!
Do not use scourers, scouring powders or solvents such as alcohol, benzine, methylated spirit, thinners, etc., as they could
damage the surface of the device.
Do not use any of the following substances: salt water, insecticide, chlorine or acidic solvents (ammonia).
Clean the housing with a soft cloth moistened with water.
Clean the display with a soft cotton cloth only. If required, use the cotton cloth with a reduced volume of non-alkaline,
diluted water-based soap solution.
Rub the surface with the cotton cloth gently until it is completely dry.
106