Turn Off Device; Transport; Loading The Vehicle For Transport - Kärcher B 300 RI D Mode D'emploi

6.4

Turn off device

7

Transport

7.1

Loading the vehicle for transport

7.1.1 Securing the vehicle
Park the machine on an even surface.

Park the machine in a safe and dry place.

Turn ignition key to "0" and remove it.

Note
With LPG devices, a switch-off delay lasting a few sec-
onds may occur.
Activate parking brake.

Gas engine: Close the gas supply.

For additional information on shutting down the device,

see the Chapter "Storage/decommissioning".
DANGER
Risk of damage!
The appliance is not approved for crane loading.

Do not use a fork lift, the appliance could get damaged.

DANGER
Risk of accident, risk of injury!
When loading the device, the drive and the parking brake

must be operational. The appliance must always be
moved up or down slopes by engaging self-propulsion.
WARNING
Risk of personal injury or damage!
Observe the weight of the appliance when you load it!

Net weight (transport weight)
Slowly drive the vehicle onto the transport vehicle.

If the vehicle is not in running condition, observe Chap-

ter "Towing".
WARNING
Risk of accident!
The vehicle must be secured against shifting during

transport.
Switch off device.

Gas engine: Close the gas supply.

1 Side brushes deck
2 Bolts
For securing the side brushes deck
Press the side brushes deck inwards and secure with

bolts.
20
-
EN
1750 kg
61