Removing Filters, Filter Spacers, And Grease Trays - Thermador PROFESSIONAL PH Serie Guide D'utilisation Et D'entretien

Removing Filters, Filter Spacers, and
Grease Trays
4
1 – Filter Spacer
2 – Filter
3 – Grease Tray
4 – Grease Tray Trough
• Turn the fan and lights off. Be sure filters are cool and
grease has congealed before removal.
• Remove in the following order:
1) Filters — Start with center filters, push up, then
pull out from the bottom.
--
The number of filters is dependent on the size and
model of the hood .
3
Use and Care Instructions
1
2
3
Figure 5: Hood and Parts
2
1
Figure 6: Filters
2) Filter Spacers — Remove these the same way as
the filters.
3) Grease Trays — lift up and out.
-- The number of grease trays is dependent on the
size and model of hood.
• Reverse the above directions to reinsert the grease
trays, filter spacers and filters.
Figure 7: Grease Tray
English | 9 |