Grease Trays And Filters - Thermador PROFESSIONAL HPCN36NS Manuel D'installation

Installing Grease Trays and
Filters
NOTE:
Do not use cooktop while hood is disassembled.
To Install Filters and Grease Trays:
1. Turn the fan and lights off.
2. Install in the following order:
1) Grease Tray — Insert in rear tray. Grease trays
must be in place before installing the filters. Push
the grease tray in and down inside the grease tray
trough.
Grease Grease Grease
Tray Trough Tray Trough Tray Trough
2) Filters — Depending upon the size and model of
hood, there will be 2 or 3 filters per hood. Start with
an outside filter. Slide the filter up, toward the front
of the hood, then push down on top of the grease
tray.
Filters
Reverse the above directions to remove the filters and
grease trays. Ensure filters are cool and grease has
congealed before removal.
English 18
Grease Grease Grease
Tray Tray Tray
Figure 27: Grease Tray Install
Figure 28: Filter Install