Care And Cleaning; Filter And Grease Tray Cleaning - Thermador Professional Série Mode D'emploi

Care and Cleaning

Filter and Grease Tray
Cleaning
WARNING
Be sure the entire appliance (including the filters and
lights) has cooled and grease has solidified before
attempting to clean any part of the appliance.
CAUTION
DO NOT use the cooktop, rangetop, or range while
hood is disassembled.
Your hood has removable stainless steel filters and
stainless steel grease trays. They must be cleaned when
the FILTER light illuminates on the Touch Control Panel or
whenever they collect grease. When used over a grill, wok
or other high grease applications, more frequent cleaning
may be required.
The filters and grease trays can be washed by hand or in
the dishwasher. Soak the ventilation filters in hot water
using a mild detergent. Rinse well and shake to dry.
Slight discoloration can occur when cleaning the filters in a
dishwasher. This has no influence on the function of the
grease filters.
NOTE: Reverse the directions below to remove the filters
and grease trays. Ensure filters are cool and grease has
congealed before removal.
To Install Filters and Grease Trays:
1. Turn the appliance OFF.
2. Grease trays must be in place before installing the
filters.
Push the grease tray in and down inside the grease
tray trough.
3. Start with an outside filter. Slide the filter up, toward
the front of the hood, then push down on top of the
grease tray.
2
3
1
Page. 14