Environmental Concerns - IKEA FRYSA Mode D'emploi

ENGLISH

Environmental concerns

WARNING!: Ensure that the
appliance is switched off and
disconnected from the power
supply before performing any
maintenance operation - risk of
electrical shock. Never use steam
cleaning equipment
Do not use abrasive or harsh cleaners such as
window sprays, scouring cleansers, flammable
fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior
and door liners or gaskets.
Do not use paper towels, scouring pads, or
other harsh cleaning tools.
Disposal of packaging materials
The packaging material is 100% recyclable
and is marked with the recycle symbol.
The various parts of the packaging must
therefore be disposed of responsibility and in
full compliance with local authority regulations
governing waste disposal.
Scrapping of household appliances
This appliance is manufactured with
recyclable or reusable materials. Dispose of
it in accordance with local waste disposal
regulations. For further information on the
treatment, recovery and recycling of household
electrical appliances, contact your local
authority, the collection service for household
waste or the store where you purchased
the appliance. This appliance is marked in
compliance with European Directive 2012/19/
EU, Waste Electrical and Electronic Equipment
(WEEE). By ensuring this product is disposed
of correctly, you will help prevent negative
consequences for the environment and human
health.
The symbol on the product or on the
accompanying documentation indicates that
it should not be treated as domestic waste but
must be taken to an appropriate collection
center for the recycling of electrical and
electronic equipment.
Energy saving tips
To guarantee adequate ventilation follow
installation instructions. Insufficient ventilation
on back of the product increases energy
consumption and decreases cooling efficiency.
Frequent door opening might cause an
increase in Energy consumption.
The internal temperature of the appliance and
the Energy Consumption may be affected
also by the ambient temperature, as well as
location of the appliance. Temperature setting
should take into consideration these factors.
Reduce to a minimum door opening.
When thawing frozen food, place them in the
refrigerator.
The low temperature of the frozen products
cools the food in the refrigerator. Allow warm
food and drinks to cool down before placing in
the appliance.
Positioning of the shelves in the refrigerator
has no impact on the efficient usage of energy.
Food should be placed on the shelves in such
way to ensure proper air circulation (food
should not touch each other and distance
between food and rear wall should be kept).
You can increase storage capacity of frozen
food by removing baskets and, if present, Stop
Frost shelve, maintaining an equivalent energy
consumption.
Do not worry of the noise coming from the
compressor.
Declaration of conformity
• This appliance has been designed for
preserving food and is manufactured
in compliance with Regulation (CE) No.
1935/2004.
• n
• This appliance has been designed,
manufactured and marketed in
compliance with:
- safety objectives of the "Low Voltage"
Directive 2014/35/EU (which replaces
2006/95/CE and subsequent
amendments);
- the protection requirements of Directive
"EMC" 2014/30/EU.
14