U
H
SING
UMIDIFIERS
H
A
3i
UMID
IRE
The
H
A
UMID
IRE
humidification (Figure E in the illustrations sheet). No other accessories are required
for its use. Please refer to the HumidAire 3i User's Manual for details.
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Compact (see section A of the illustrations
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
H
A
UMID
IRE
You need medium sized 21" (52 cm) air tubing to connect your
H
A
humidifier. To set up the
UMID
IRE
1
Fill the
H
A
UMID
medium 21" (52 cm) and long 6'6" (2 m) air tubing (F-1), and close the humidifier lid.
2
Place the
S8 C
the medium air tubing to the air outlet (F-3).
Note: To avoid water spilling into the S8 Compact, do not put it underneath the
humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing (F-4).
4
Plug the
H
UMID
cord to the socket at the rear of the
outlet.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The
S8 C
OMPACT
R
M
P
ES
ED
ASSOVER
You need medium sized 21" (52 cm) air tubing to connect your
P
ResMed
ASSOVER
1
Fill the
P
ASSOVER
(2 m) air tubing (G-1).
2
S8 C
Place the
OMPACT
medium air tubing to the air outlet (G-3).
3i
attaches to the front of an
with water, and place the filled water chamber inside. Connect the
IRE
on top of the
OMPACT
A
power cord into a power outlet. Connect the
IRE
S8 C
is now ready for use with the
humidifier. To set up the
with water and connect the medium 21" (52 cm) and long 6'6"
on top of the
S8 C
OMPACT
S8 C
with the
OMPACT
H
A
(F-2) and connect the free end of
UMID
IRE
and plug the other end into a power
OMPACT
H
A
UMID
IRE
S8 C
with the
OMPACT
P
(G-2) and connect the free end of the
ASSOVER
device to provide heated
S8 C
to a
OMPACT
H
A
:
UMID
IRE
S8 C
power
OMPACT
.
S8 C
to a
OMPACT
P
:
ASSOVER
O
I
PERATING
NFORMATION
13