Maintenance And Care; Contact Information - EUFAB PREMIUM TG Manuel De L'opérateur

Release the wing nut of the wheel stopper. Push the wheel
stopper to the end of the wheel rail. You can now take the
wheel stopper out of the wheel rail.
Insert the wheel stopper into the wheel rail. Align the wheel
stopper so that it is always positioned between the wheels
of the bike, never before or behind them. Push the wheel
stopper onto the wheel rail.
Remount the cover and tighten the screw.
6
5.1 ATTACH THE BICYCLES
Fig. 2
• Push the unlocking lever (1) upwards. Now you can pull the
lashing strap from the turnbuckle.
• Now place the bicycle onto the bike rack and attach it to
the frame holder in line with the instructions issued for the
bike rack.
• Push the wheel stopper toward the tyres of the bicycle and
then tighten the wing nuts of the wheel stopper.
Fig. 3
• Wrap the lashing strap around the wheel rim of the bicycle
and insert it into the turnbuckle (2).
• Position the wheel rim protector so that the lashing strap
cannot rub against and damage the wheel rim during
transportation.
• Tighten the lashing strap by levering the turnbuckle (3)
several times.
Fig. 4

6. MAINTENANCE AND CARE

Clean the wheel stopper using a slightly moist, soft cloth and
a mild cleaning agent. Do not use aggressive cleaning agents,
solvents or petrol. Store the wheel stopper in a dry place.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of the wheel stopper via the recycling bin or
the public/municipal collection points.
The materials are recyclable. Play a part in protecting our
environment by recycling or reusing waste equipment.

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
CAUTION
The wheel stopper must always be
positioned between the wheels of the
bike, never before or behind them.
Fig. 5