Maintenance And Care; Contact Information - EUFAB 11595 Notice D'utilisation

Figure 2: Removing the bolts
The gure only depicts an example of wheel rail
replacement.
The heaviest bicycle must always be transported on
the rail nearest to the vehicle.
Insert the short tensioning strap from the inside to the outside
under the wheel holder and then from the outside to the inside
through the slots of the wheel holder (Figure 3).
Figure 3: Installing the tensioning belts

6. MAINTENANCE AND CARE

Clean the wheel rails using a slightly moist, soft cloth and a mild
cleaning agent. Do not use aggressive cleaning agents, solvents
or petrol. Store the wheel rails in a dry place.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of the wheel rails via the recycling bin or the pub-
lic/municipal collection points.
The materials are recyclable. You make an important contribu-
tion to protecting our environment by recycling, material utilisa-
tion or other forms of reusing waste equipment.

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5