Display Setting; Audio Setting - Magnavox MWD7006 Manuel D'utilisation De L'appareil

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to  in the "CUSTOM Menu" section on page 16.
4
Select the desired item.
OK OK
DISPLAY menu
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
OK
Hint
TV ASPECT:
• Select "4: LETTER BOX", so that
black bars may appear on the top
and bottom of the screen.
• Select "4: PAN & SCAN" for a
full height picture with both sides
adjusted.
• Select "16:9 WIDE" if a wide screen
TV is connected to this unit.
PROGRESSIVE:
• You can set "PROGRESSIVE" to
"OFF" in the DISPLAY menu or
press and hold [PLAY B] on the
front of the unit for more than 5
seconds during playback, so that
the P-SCAN indicator on the front
panel lights off.
• When "PROGRESSIVE" is "ON",
video signals from the unit's VIDEO
OUT and S-VIDEO OUT jacks will
be distorted or not be output at all.
C

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
 in the "CUSTOM Menu" section on page 16.
4
Select the desired item.
OK OK
AUDIO menu
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OK
5
TV ASPECT: (Default: 4:3 LETTER BOX)
QUICK
See Hint on the left.
TV ASPECT
TV ASPECT 4:3 LETTER BOX
4:3 LETTER BOX
STILL MODE AUTO
4:3 PAN & SCAN
PROGRESSIVE OFF
16:9 WIDE
OK
STILL MODE: (Default: AUTO)
See Hint on the right.
STILL MODE
TV ASPECT 4:3 LETTER BOX
AUTO
STILL MODE AUTO
FIELD
PROGRESSIVE OFF
FRAME
OK
PROGRESSIVE: (Default: OFF)
QUICK
See Hint on the left.
TV ASPECT 4:3 LETTER BOX 4:3 LETTER BOX
STILL MODE AUTO AUTO
PROGRESSIVE OFF ON
OK
If there is no picture or
you do not press any
buttons for 15 seconds,
Progressive scan will
switch to "OFF" and
it will exit the setup
menu.
5
DRC (Dynamic Range Control): (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OK
DRC ON
DOWN SAMPLING: (Default: ON) DRC ON
DOWN SAMPLING ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
Set to "ON" when outputting in 48kHz.
DOLBY DIGITAL BITSTREAM
Set to "OFF" when outputting the original sound.
DRC ON
DRC ON
DRC ON
DOWN SAMPLING ON
DOWN SAMPLING ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
DOLBY DIGITAL BITSTREAM
DOLBY DIGITAL BITSTREAM
OK
DOLBY DIGITAL: DRC ON
DRC ON
QUICK
DOWN SAMPLING ON
DOWN SAMPLING ON
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
DOLBY DIGITAL BITSTREAM
DOLBY DIGITAL BITSTREAM
• B ITSTREAM: Outputs a Dolby Digital Signals.
• P CM: Convert the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OK
Select the
desired
setting.
OK OK
Select the
desired
setting.
OK OK
SETUP
Select "Yes".
Before proceeding...
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
Activate Progr e ssive ?
NO
YES
SELECT: K / L SET:OK
OK
Select "Yes".
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
NO NO
YES YES
SELECT: K / L SET:OK
OFF
ON
BITSTREAM
OFF
ON
ON
OFF
BITSTREAM
BITSTREAM
ON
OFF
ON
OFF
ON
ON
BITSTREAM
BITSTREAM
PCM
(Default: BITSTREAM) ON
ON
ON
OFF
PCM
BITSTREAM
ON
ON
PCM
-18-
6
To exit the menu
SETUP
OK
To complete the
PROGRESSIVE
setting
OK
OK
Hint
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO",
automatically select the
best resolution setting
(FRAME or FIELD) based
on the data characteristics
of the pictures. (default).
• If you select "FIELD", the
picture in the still mode will
be stabilized.
• If you select "FRAME", the
picture in the still mode will
be highly defined.
OK OK
• An individual picture on TV
screen is called a "frame",
which consists of two
separate images called a
"field".
• Some pictures may be
blurred at if you select
"AUTO" in the still mode
OK OK
due to their data charac-
teristics.
6
To exit the menu
SETUP
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled
at 48kHz, even if you set
to "OFF".
• This function is available
only on digital outputting of
a disc recorded in 96kHz.
EN