Troubleshooting - Ducati MG-20 Manuel D'utilisation

Display Indicator
Brake
Accelerator fault
Motor fault
Controller fault

12. Troubleshooting

Reasons
Indicates that the brake is engaged
Brake lever does not return to normal position
Without accelerator
Accelerator cable, accelerator or connector
is broken/damaged
Connectors between accelerator and
controller are not well connected
Motor is not working
Cables or connector is broken/damaged
Motor hall cable is not connected well
or connected wrong
Controller is broken
27
Solutions
/
Press brake lever some times to let it
return. Replace with new brake lever
/
Replace with new cable, accelerator
Reconnect well
Replace with new motor
Replace with new cable
Reconnect well
Replace with new controller