Festo CPA ASI Serie Instructions D'utilisation page 13

3 Addressing
3.1 Assign the AS-Interface slave address
We recommend the use of the Festo addresser type ASI-
PRG-ADR with adapter cable type KASI-ADR.
Before connecting an AS-Interface slave to the bus, assign
a non-reserved AS-Interface address to each AS-Interface
slave. Set the desired address with the AS-Interface ad-
dresser. Permitted range 1...31.
– The factory setting of the terminal is address 00
– ID/ IO code see type plate or technical specifications
– It is not necessary to parametrize the AS-Interface
slaves.
3.2 Output assignment of the valve coils
Examples: Fitting valve locations
2 double-solenoid 4 single-solenoid valves
valves (Sub-base (Sub-base block EV1)
block EV2)
2 1 4 3
Festo CPA..-ASI... 0208a English
1 double-solenoid
valve (EV2), 2 single-
solenoid valves (EV1)
1 2 3 4 2 1 3 4
13