Shimano Steps RIDE+ Manuel Du Propriétaire page 24

< BT-E8020 >
For the purposes of demonstration, these instructions
take as an example a frame design where the battery is
removed/installed from below.
Insert the battery into the battery mount until there is a
click.
• When inserted until a click is heard, the battery is
locked automatically.
•
Check that the battery is locked before riding the bicycle.
The battery may come loose and fall out if not properly
locked in place before riding.
•
Before riding, make sure that the keyhole cap and charging
port cap are closed.
•
To prevent the battery from falling out, do not ride the
bicycle with the key inserted.
NOTE
Keyhole cap
18