First Aid - Makita EBH340R Manuel D'instructions

Never straighten or weld damaged cutting blades.
– Be kind to the environment. Operate the brushcutter with as little
noise and pollution as possible. In particular check the correct
adjustment of the carburetor.
– Clean the brushcutter at regular intervals and check that all
screws and nuts are securely tightened.
– Never service or store the brushcutter in the vicinity of open
flames, sparks, etc.
– Always store the brushcutter in a well-ventilated locked room and
with an emptied fuel tank.
Observe and follow all relevant accident prevention instructions
issued by the trade associations and by insurance companies.
Do not perform any modifications to the brushcutter as this will risk
your safety.
The performance of maintenance or repair work by the user is
limited to those activities s described in this instruction manual. All
other work is to be done by Authorized Service Agents.
Use only genuine spare parts and accessories supplied by MAKITA.
Use of non-approved accessories and tools means increased
risk of accidents and injuries. MAKITA will not accept any liability
for accidents or damage caused by the use of any non-approved
cutting tools attachments or accessories.

First Aid

In case of accident make sure that a well-stocked first-aid kit is
available in the vicinity of the cutting operations. Immediately
replace any item taken from the first aid box.
When asking for help, please give the following
information:
– Place of accident
– What happened
– Number of injured persons
– Extent of injuries
– Your name
Packaging
The MAKITA brushcutter is delivered in two protective cardboard
boxes to prevent shipping damage.
Cardboard is a basic raw material and is therefore consequently
reusable or suitable for recycling (waste paper recycling).
6