Safety Instructions; General Instructions; Personal Protective Equipment - Makita EBH340R Manuel D'instructions

SAFETY INSTRUCTIONS

General Instructions

– To ensure correct and safe operation, the user must read,
understand and follow this instruction manual to assure familiarity
with the handling of the brushcutter. Users insufficiently informed
will risk danger to themselves as well as others due to improper
handling.
– It is recommended only to loan the brushcutter to people who
have proven to be experienced with brushcutters.
Always hand over the instruction manual.
– Use brushcutters with the utmost care and attention.
– First-time users should ask the dealer for basic instructions to
familiarize oneself with the handling of an engine powered cutter.
– Children and young persons aged under 18 years must not be
allowed to operate the brushcutter. Persons over the age of 16
years may however use the tool for the purpose of being trained
only while under the direct supervision of a qualified trainer.
– Use brushcutters with the utmost care and attention.
– Operate the brushcutter only if you are in good physical condition.
Perform all work conscientiously and carefully. The user has to
accept responsibility for others.
– Never use the brushcutter while under the influence of alcohol or
drugs.
– Do not use the unit when you are tired.
– Save these instructions for future referral.

Personal protective equipment

– The clothing worn should be functional and appropriate, i.e.
it should be tight-fitting but not cause hindrance. Do not wear
jewelry, clothing or long hair which could become entangled with
bushes or shrubs.
– In order to avoid head-, eye-, hand- or foot injuries as well
as to protect your hearing the following protective equipment
and protective clothing must be used during operation of the
brushcutter.
– Always wear a helmet when working in the forest. The protective
helmet (1) is to be checked at regular intervals for damage and
is to be replaced at least every 5 years. Use only approved
protective helmets.
– The visor (2) of the helmet (or approved goggles) protects the
face from flying sticks, stones or other object. During operation
of the brushcutter always wear goggles, or a visor to prevent eye
injuries.
– Wear adequate noise protection equipment to avoid hearing
impairment (ear muffs (3), ear plugs etc.), especially during
extended work periods.
– The work overalls (4) protect against flying stones and splinters.
We strongly recommend that the user wear work overalls.
– Special gloves (5) made of thick leather are part of the prescribed
equipment and must always be worn during operation of the
brushcutter.
– When using the brushcutter, always wear sturdy shoes (6) with
a non-slip sole. This protects against injuries and ensures good
footing.
Starting up the brushcutter
– Please make sure that there are no children or other people
within a working range of 50 ft. or 15 meters, also pay attention to
any animals in the working vicinity.
– Before operating, always check that the brushcutter is safe
for operation:
Check the security of the cutter blade. Be sure the blade
mounting nut is firmly secured. The throttle lever should
be checked for smooth and easy action. Check for proper
functioning of the throttle lever lock. The cutter blade must not
rotate during idling.
Consult idle adjustment instructions on page 15. Check for clean
and dry handles and test the function of the STOP switch.
Keep handles free of oil and fuel.
– Before operation, check and follow local; regulations concerning
sound level and hours of operations.
– Only start the brushcutter positioned on the ground.
– Do not start it on the back.
3
(3)
15 m (50 FT)