Table des Matières
Publicité
®
R&S
Cable Rider ZPH
4.6
Display Overview
The display area has a touch-sensitive screen, the touch functionality can be
turned on or off in the instrument setup menu.
For information of the display areas and touchscreen gestures, see the R&S
Cable Rider ZPH user manual.
1 = Title bar
2 = Measurement result view
3 = Measurement trace window
4 = Parameter view
Risk of touchscreen damage during operation
● Never touch the screen with ball point pens or other pointed objects with
sharp edges.
● It is recommended that you operate the touchscreen by finger only. As
an alternative, you may use a stylus pen with a smooth soft tip.
● Never apply excessive force to the screen. Touch it gently.
● Never scratch the screen surface, e.g. with a finger nail. Never rub it
strongly, for example with a dust cloth.
Getting Started 1321.0944.02 ─ 04
Instrument Tour
Display Overview
23
Publicité
Table des Matières
