Battery Operation - Rohde & Schwarz ZPH Serie Manuel D'instructions

®
R&S Cable Rider ZPH
Figure 3-1: AC adapter
1 = AC adapter
2 = Power cable
The voltage range of the AC power supply is 100 V to 240 V AC.
After the R&S Cable Rider ZPH is connected to the power supply, you can turn it
on with the POWER key on the front panel.
3.1.5

Battery Operation

The R&S Cable Rider ZPH has a smart battery indicator which displays the bat-
tery charging status on the POWER key as well as the battery icon shown at the
top right corner of the display screen. See
on page 23.
The lithium ion battery has a capacity of 6.4 Ah and it allows operation of up to
nine hours when it is fully charged.
The actual operation time depends on the current charged status (see
ure 3-2), the ambient temperature and the operating mode of the R&S Cable
Rider ZPH.
For a summary of the LED indication of the POWER key, see
The battery charging and discharging process of the battery icon indicated in the
display screen is illustrated below:
Getting Started 1321.0944.02 ─ 04
Chapter 4.6, "Display
Preparing for Use
Putting into Operation
Overview",
Fig-
Table 3-1.
13