Table des Matières
Publicité
®
R&S
Cable Rider ZPH
3.1.1
Unpacking and Checking the Instrument
Unpack the R&S Cable Rider ZPH carefully and check the contents of the pack-
age.
● Check the equipment for completeness using the delivery note and the acces-
sory lists for the various items.
● Check the instrument for any damage. If there is damage, immediately contact
the carrier who delivered the instrument.
● Keep the box and packing material.
Risk of damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during
transportation and shipment can damage the instrument.
● Always make sure that sufficient mechanical and electrostatic protection
is provided.
● When shipping an instrument, the original packaging should be used. If
you do not have the original packaging, use sufficient padding to pre-
vent the instrument from moving around inside the box. Pack the instru-
ment in antistatic wrap to protect it from electrostatic charging.
● Secure the instrument to prevent any movement and other mechanical
effects during transportation.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped at a later date, you can use the material to protect the control
elements and connectors.
3.1.2
Accessory List
The instrument comes with the following accessories:
● Power supply cable and adapter set
● Li-ion rechargeable battery
● USB2.0 cable A-Mini
Getting Started 1321.0944.02 ─ 04
Preparing for Use
Putting into Operation
10
Publicité
Table des Matières
