Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USING MANUAL OPERATION
See Caution No. 5 on page 2.
Press the
button.
1 The operation to check you are seated (tapping around shoulders) will begin.
Caution
Keep your head on the backrest
until the massage begins.
Otherwise an error message
(U10) is displayed and operations
are terminated.
2 When the unit has confirmed that you are seated, 6 types of action including Soft Shiatsu,
Knead and Tap are performed sequentially.
<Sequence of massage operations>
1
Knead upwards
2
Soft shiatsu
3
Knead downwards
[Display during massage]
Massage Operation Display
The operations change automatically.
•
When the same spot has been massaged continuously for 5 minutes, the massage position is automatically moved
upwards by around 1.2 in. (3 cm).
21
21-22
4
Tap
5
Upward knead and tap
6
Downward knead and tap
To Customize
To adjust the position
Press
or
to adjust.
•
Each press moves the massage heads
approximately 0.6 in. (1.5 cm).
•
When you hold down the button, the operation
will continue until you release it.
To adjust program intensity
Press the – + adjustment buttons.
To continue exclusively with a single operation such as Soft Shiatsu or Knead
Press the
button during an operation to continue the same operation only.
•
To change the operation, press the
button again. The operations will then change automatically in
sequence.
To use the leg/foot massage simultaneously
Press the
button.
(See page 23.)
To change the content of the massage
To change to Self Program
Press the
button and select a program.
Upper body massage will stop temporarily.
(See page 18.)
To change to Pre-Programs
Press the
button and select a program.
Upper body massage will stop temporarily.
(See page 15.)
Flashing indicates the approximate current
position.
Content of
display
Intensity
1
2
3
Adjustment
2010/01/20
22
13:28:53
Publicité
Table des Matières
