Lenz Digital plus GOLDmini+ Manuel D'utilisation page 38

38
0-255
55 Sets brightness at function outputs A, 255=max
0-255 Sets brightness at function outputs B, 255=max
56
Function mapping:
57
Each bit of the CV stands for a function of the digital system:
-
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
59,
Bit 8(7) for function 8. If you wish to allocate a function to the
61
dimming, the respective bit must be set.
0-255
57 Dimming (no ex-works setting)
0-255 Shunting speed (ex-works setting F3)
58
59 0-255 Switching off the delay (ex-works setting F4)
0-255 Lighting effect at function outputs A and B. The units digit of the
60
value stands for function output A, the tens digit for function
output B:
0
1
3
0-255 Function mapping: lighting effect at function outputs A and B
61
67.. 0-255 Values for characteristic speed line, default = ex-works speed line
94
112 0-255 Duration of motor timeout when track signal has stopped.
t = CV112 * 0.016sec, default approx. 0.25 sec
0-255 Minimum PWM value, control for motor types 4 or 5
113
114 0-255 Change duty cycle for motor type 4 or 5
128 Service number (Please read out the number)
No effect,
Marslight,
Strobe,
2 Gyrolight
4 Double strobe
Information GOLDmini+
255
255
0
4
8
0
0
16
40
10
-